home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
bit
/
src
/
jpeg
/
example.c
< prev
next >
Wrap
C/C++ Source or Header
|
1994-08-01
|
27KB
|
632 lines
/*
* example.c
*
* This file is not actually part of the JPEG software. Rather, it provides
* a skeleton that may be useful for constructing applications that use the
* JPEG software as subroutines. This code will NOT do anything useful as is.
*
* This file illustrates how to use the JPEG code as a subroutine library
* to read or write JPEG image files. We assume here that you are not
* merely interested in converting the image to yet another image file format
* (if you are, you should be adding another I/O module to cjpeg/djpeg, not
* constructing a new application). Instead, we show how to pass the
* decompressed image data into or out of routines that you provide. For
* example, a viewer program might use the JPEG decompressor together with
* routines that write the decompressed image directly to a display.
*
* We present these routines in the same coding style used in the JPEG code
* (ANSI function definitions, etc); but you are of course free to code your
* routines in a different style if you prefer.
*/
/*
* Include file for declaring JPEG data structures.
* This file also includes some system headers like <stdio.h>;
* if you prefer, you can include "jconfig.h" and "jpegdata.h" instead.
*/
#include "jinclude.h"
/*
* <setjmp.h> is used for the optional error recovery mechanism shown in
* the second part of the example.
*/
#include <setjmp.h>
/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
/* This half of the example shows how to feed data into the JPEG compressor.
* We present a minimal version that does not worry about refinements such
* as error recovery (the JPEG code will just exit() if it gets an error).
*/
/*
* To supply the image data for compression, you must define three routines
* input_init, get_input_row, and input_term. These routines will be called
* from the JPEG compressor via function pointer values that you store in the
* cinfo data structure; hence they need not be globally visible and the exact
* names don't matter. (In fact, the "METHODDEF" macro expands to "static" if
* you use the unmodified JPEG include files.)
*
* The input file reading modules (jrdppm.c, jrdgif.c, jrdtarga.c, etc) may be
* useful examples of what these routines should actually do, although each of
* them is encrusted with a lot of specialized code for its own file format.
*/
METHODDEF void
input_init (compress_info_ptr cinfo)
/* Initialize for input; return image size and component data. */
{
/* This routine must return five pieces of information about the incoming
* image, and must do any setup needed for the get_input_row routine.
* The image information is returned in fields of the cinfo struct.
* (If you don't care about modularity, you could initialize these fields
* in the main JPEG calling routine, and make this routine be a no-op.)
* We show some example values here.
*/
cinfo->image_width = 640; /* width in pixels */
cinfo->image_height = 480; /* height in pixels */
/* JPEG views an image as being a rectangular array of pixels, with each
* pixel having the same number of "component" values (color channels).
* You must specify how many components there are and the colorspace
* interpretation of the components. Most applications will use RGB data or
* grayscale data. If you want to use something else, you'll need to study
* and perhaps modify jcdeflts.c, jccolor.c, and jdcolor.c.
*/
cinfo->input_components = 3; /* or 1 for grayscale */
cinfo->in_color_space = CS_RGB; /* or CS_GRAYSCALE for grayscale */
cinfo->data_precision = 8; /* bits per pixel component value */
/* In the current JPEG software, data_precision must be set equal to
* BITS_IN_JSAMPLE, which is 8 unless you twiddle jconfig.h. Future
* versions might allow you to say either 8 or 12 if compiled with
* 12-bit JSAMPLEs, or up to 16 in lossless mode. In any case,
* it is up to you to scale incoming pixel values to the range
* 0 .. (1<<data_precision)-1.
* If your image data format is fixed at a byte per component,
* then saying "8" is probably the best long-term solution.
*/
}
/*
* This function is called repeatedly and must supply the next row of pixels
* on each call. The rows MUST be returned in top-to-bottom order if you want
* your JPEG files to be compatible with everyone else's. (If you cannot
* readily read your data in that order, you'll need an intermediate array to
* hold the image. See jrdtarga.c or jrdrle.c for examples of handling
* bottom-to-top source data using the JPEG code's portable mechanisms.)
* The data is to be returned into a 2-D array of JSAMPLEs, indexed as
* JSAMPLE pixel_row[component][column]
* where component runs from 0 to cinfo->input_components-1, and column runs
* from 0 to cinfo->image_width-1 (column 0 is left edge of image). Note that
* this is actually an array of pointers to arrays rather than a true 2D array,
* since C does not support variable-size multidimensional arrays.
* JSAMPLE is typically typedef'd as "unsigned char".
*/
METHODDEF void
get_input_row (compress_info_ptr cinfo, JSAMPARRAY pixel_row)
/* Read next row of pixels into pixel_row[][] */
{
/* This example shows how you might read RGB data (3 components)
* from an input file in which the data is stored 3 bytes per pixel
* in left-to-right, top-to-bottom order.
*/
register FILE * infile = cinfo->input_file;
register JSAMPROW ptr0, ptr1, ptr2;
register long col;
ptr0 = pixel_row[0];
ptr1 = pixel_row[1];
ptr2 = pixel_row[2];
for (col = 0; col < cinfo->image_width; col++) {
*ptr0++ = (JSAMPLE) getc(infile); /* red */
*ptr1++ = (JSAMPLE) getc(infile); /* green */
*ptr2++ = (JSAMPLE) getc(infile); /* blue */
}
}
METHODDEF void
input_term (compress_info_ptr cinfo)
/* Finish up at the end of the input */
{
/* This termination routine will very often have no work to do, */
/* but you must provide it anyway. */
/* Note that the JPEG code will only call it during successful exit; */
/* if you want it called during error exit, you gotta do that yourself. */
}
/*
* That's it for the routines that deal with reading the input image data.
* Now we have overall control and parameter selection routines.
*/
/*
* This routine must determine what output JPEG file format is to be written,
* and make any other compression parameter changes that are desirable.
* This routine gets control after the input file header has been read
* (i.e., right after input_init has been called). You could combine its
* functions into input_init, or even into the main control routine, but
* if you have several different input_init routines, it's a definite win
* to keep this separate. You MUST supply this routine even if it's a no-op.
*/
METHODDEF void
c_ui_method_selection (compress_info_ptr cinfo)
{
/* If the input is gray scale, generate a monochrome JPEG file. */
if (cinfo->in_color_space == CS_GRAYSCALE)
j_monochrome_default(cinfo);
/* For now, always select JFIF output format. */
jselwjfif(cinfo);
}
/*
* OK, here is the main function that actually causes everything to happen.
* We assume here that the target filename is supplied by the caller of this
* routine, and that all JPEG compression parameters can be default values.
*/
GLOBAL void
write_JPEG_file (char * filename)
{
/* These three structs contain JPEG parameters and working data.
* They must survive for the duration of parameter setup and one
* call to jpeg_compress; typically, making them local data in the
* calling routine is the best strategy.
*/
struct Compress_info_struct cinfo;
struct Compress_methods_struct c_methods;
struct External_methods_struct e_methods;
/* Initialize the system-dependent method pointers. */
cinfo.methods = &c_methods; /* links to method structs */
cinfo.emethods = &e_methods;
/* Here we use the default JPEG error handler, which will just print
* an error message on stderr and call exit(). See the second half of
* this file for an example of more graceful error recovery.
*/
jselerror(&e_methods); /* select std error/trace message routines */
/* Here we use the standard memory manager provided with the JPEG code.
* In some cases you might want to replace the memory manager, or at
* least the system-dependent part of it, with your own code.
*/
jselmemmgr(&e_methods); /* select std memory allocation routines */
/* If the compressor requires full-image buffers (for entropy-coding
* optimization or a noninterleaved JPEG file), it will create temporary
* files for anything that doesn't fit within the maximum-memory setting.
* (Note that temp files are NOT needed if you use the default parameters.)
* You can change the default maximum-memory setting by changing
* e_methods.max_memory_to_use after jselmemmgr returns.
* On some systems you may also need to set up a signal handler to
* ensure that temporary files are deleted if the program is interrupted.
* (This is most important if you are on MS-DOS and use the jmemdos.c
* memory manager back end; it will try to grab extended memory for
* temp files, and that space will NOT be freed automatically.)
* See jcmain.c or jdmain.c for an example signal handler.
*/
/* Here, set up pointers to your own routines for input data handling
* and post-init parameter selection.
*/
c_methods.input_init = input_init;
c_methods.get_input_row = get_input_row;
c_methods.input_term = input_term;
c_methods.c_ui_method_selection = c_ui_method_selection;
/* Set up default JPEG parameters in the cinfo data structure. */
j_c_defaults(&cinfo, 75, FALSE);
/* Note: 75 is the recommended default quality level; you may instead pass
* a user-specified quality level. Be aware that values below 25 will cause
* non-baseline JPEG files to be created (and a warning message to that
* effect to be emitted on stderr). This won't bother our decoder, but some
* commercial JPEG implementations may choke on non-baseline JPEG files.
* If you want to force baseline compatibility, pass TRUE instead of FALSE.
* (If non-baseline files are fine, but you could do without that warning
* message, set e_methods.trace_level to -1.)
*/
/* At this point you can modify the default parameters set by j_c_defaults
* as needed. For a minimal implementation, you shouldn't need to change
* anything. See jcmain.c for some examples of what you might change.
*/
/* Select the input and output files.
* Note that cinfo.input_file is only used if your input reading routines
* use it; otherwise, you can just make it NULL.
* VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
* requires it in order to write binary files.
*/
cinfo.input_file = NULL; /* if no actual input file involved */
if ((cinfo.output_file = fopen(filename, "wb")) == NULL) {
fprintf(stderr, "can't open %s\n", filename);
exit(1);
}
/* Here we go! */
jpeg_compress(&cinfo);
/* That's it, son. Nothin' else to do, except close files. */
/* Here we assume only the output file need be closed. */
fclose(cinfo.output_file);
/* Note: if you want to compress more than one image, we recommend you
* repeat this whole routine. You MUST repeat the j_c_defaults()/alter
* parameters/jpeg_compress() sequence, as some data structures allocated
* in j_c_defaults are freed upon exit from jpeg_compress.
*/
}
/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
/* This half of the example shows how to read data from the JPEG decompressor.
* It's a little more refined than the above in that we show how to do your
* own error recovery. If you don't care about that, you don't need these
* next two routines.
*/
/*
* These routines replace the default trace/error routines included with the
* JPEG code. The example trace_message routine shown here is actually the
* same as the standard one, but you could modify it if you don't want messages
* sent to stderr. The example error_exit routine is set up to return
* control to read_JPEG_file() rather than calling exit(). You can use the
* same routines for both compression and decompression error recovery.
*/
/* These static variables are needed by the error routines. */
static jmp_buf setjmp_buffer; /* for return to caller */
static external_methods_ptr emethods; /* needed for access to message_parm */
/* This routine is used for any and all trace, debug, or error printouts
* from the JPEG code. The parameter is a printf format string; up to 8
* integer data values for the format string have been stored in the
* message_parm[] field of the external_methods struct.
*/
METHODDEF void
trace_message (const char *msgtext)
{
fprintf(stderr, msgtext,
emethods->message_parm[0], emethods->message_parm[1],
emethods->message_parm[2], emethods->message_parm[3],
emethods->message_parm[4], emethods->message_parm[5],
emethods->message_parm[6], emethods->message_parm[7]);
fprintf(stderr, "\n"); /* there is no \n in the format string! */
}
/*
* The error_exit() routine should not return to its caller. The default
* routine calls exit(), but here we assume that we want to return to
* read_JPEG_file, which has set up a setjmp context for the purpose.
* You should make sure that the free_all method is called, either within
* error_exit or after the return to the outer-level routine.
*/
METHODDEF void
error_exit (const char *msgtext)
{
trace_message(msgtext); /* report the error message */
(*emethods->free_all) (); /* clean up memory allocation & temp files */
longjmp(setjmp_buffer, 1); /* return control to outer routine */
}
/*
* To accept the image data from decompression, you must define four routines
* output_init, put_color_map, put_pixel_rows, and output_term.
*
* You must understand the distinction between full color output mode
* (N independent color components) and colormapped output mode (a single
* output component representing an index into a color map). You should use
* colormapped mode to write to a colormapped display screen or output file.
* Colormapped mode is also useful for reducing grayscale output to a small
* number of gray levels: when using the 1-pass quantizer on grayscale data,
* the colormap entries will be evenly spaced from 0 to MAX_JSAMPLE, so you
* can regard the indexes are directly representing gray levels at reduced
* precision. In any other case, you should not depend on the colormap
* entries having any particular order.
* To get colormapped output, set cinfo->quantize_colors to TRUE and set
* cinfo->desired_number_of_colors to the maximum number of entries in the
* colormap. This can be done either in your main routine or in
* d_ui_method_selection. For grayscale quantization, also set
* cinfo->two_pass_quantize to FALSE to ensure the 1-pass quantizer is used
* (presently this is the default, but it may not be so in the future).
*
* The output file writing modules (jwrppm.c, jwrgif.c, jwrtarga.c, etc) may be
* useful examples of what these routines should actually do, although each of
* them is encrusted with a lot of specialized code for its own file format.
*/
METHODDEF void
output_init (decompress_info_ptr cinfo)
/* This routine should do any setup required */
{
/* This routine can initialize for output based on the data passed in cinfo.
* Useful fields include:
* image_width, image_height Pretty obvious, I hope.
* data_precision bits per pixel value; typically 8.
* out_color_space output colorspace previously requested
* color_out_comps number of color components in same
* final_out_comps number of components actually output
* final_out_comps is 1 if quantize_colors is true, else it is equal to
* color_out_comps.
*
* If you have requested color quantization, the colormap is NOT yet set.
* You may wish to defer output initialization until put_color_map is called.
*/
}
/*
* This routine is called if and only if you have set cinfo->quantize_colors
* to TRUE. It is given the selected colormap and can complete any required
* initialization. This call will occur after output_init and before any
* calls to put_pixel_rows. Note that the colormap pointer is also placed
* in a cinfo field, whence it can be used by put_pixel_rows or output_term.
* num_colors will be less than or equal to desired_number_of_colors.
*
* The colormap data is supplied as a 2-D array of JSAMPLEs, indexed as
* JSAMPLE colormap[component][indexvalue]
* where component runs from 0 to cinfo->color_out_comps-1, and indexvalue
* runs from 0 to num_colors-1. Note that this is actually an array of
* pointers to arrays rather than a true 2D array, since C does not support
* variable-size multidimensional arrays.
* JSAMPLE is typically typedef'd as "unsigned char". If you want your code
* to be as portable as the JPEG code proper, you should always access JSAMPLE
* values with the GETJSAMPLE() macro, which will do the right thing if the
* machine has only signed chars.
*/
METHODDEF void
put_color_map (decompress_info_ptr cinfo, int num_colors, JSAMPARRAY colormap)
/* Write the color map */
{
/* You need not provide this routine if you always set cinfo->quantize_colors
* FALSE; but a safer practice is to provide it and have it just print an
* error message, like this:
*/
fprintf(stderr, "put_color_map called: there's a bug here somewhere!\n");
}
/*
* This function is called repeatedly, with a few more rows of pixels supplied
* on each call. With the current JPEG code, some multiple of 8 rows will be
* passed on each call except the last, but it is extremely bad form to depend
* on this. You CAN assume num_rows > 0.
* The data is supplied in top-to-bottom row order (the standard order within
* a JPEG file). If you cannot readily use the data in that order, you'll
* need an intermediate array to hold the image. See jwrrle.c for an example
* of outputting data in bottom-to-top order.
*
* The data is supplied as a 3-D array of JSAMPLEs, indexed as
* JSAMPLE pixel_data[component][row][column]
* where component runs from 0 to cinfo->final_out_comps-1, row runs from 0 to
* num_rows-1, and column runs from 0 to cinfo->image_width-1 (column 0 is
* left edge of image). Note that this is actually an array of pointers to
* pointers to arrays rather than a true 3D array, since C does not support
* variable-size multidimensional arrays.
* JSAMPLE is typically typedef'd as "unsigned char". If you want your code
* to be as portable as the JPEG code proper, you should always access JSAMPLE
* values with the GETJSAMPLE() macro, which will do the right thing if the
* machine has only signed chars.
*
* If quantize_colors is true, then there is only one component, and its values
* are indexes into the previously supplied colormap. Otherwise the values
* are actual data in your selected output colorspace.
*/
METHODDEF void
put_pixel_rows (decompress_info_ptr cinfo, int num_rows, JSAMPIMAGE pixel_data)
/* Write some rows of output data */
{
/* This example shows how you might write full-color RGB data (3 components)
* to an output file in which the data is stored 3 bytes per pixel.
*/
register FILE * outfile = cinfo->output_file;
register JSAMPROW ptr0, ptr1, ptr2;
register long col;
register int row;
for (row = 0; row < num_rows; row++) {
ptr0 = pixel_data[0][row];
ptr1 = pixel_data[1][row];
ptr2 = pixel_data[2][row];
for (col = 0; col < cinfo->image_width; col++) {
putc(GETJSAMPLE(*ptr0), outfile); /* red */
ptr0++;
putc(GETJSAMPLE(*ptr1), outfile); /* green */
ptr1++;
putc(GETJSAMPLE(*ptr2), outfile); /* blue */
ptr2++;
}
}
}
METHODDEF void
output_term (decompress_info_ptr cinfo)
/* Finish up at the end of the output */
{
/* This termination routine may not need to do anything. */
/* Note that the JPEG code will only call it during successful exit; */
/* if you want it called during error exit, you gotta do that yourself. */
}
/*
* That's it for the routines that deal with writing the output image.
* Now we have overall control and parameter selection routines.
*/
/*
* This routine gets control after the JPEG file header has been read;
* at this point the image size and colorspace are known.
* The routine must determine what output routines are to be used, and make
* any decompression parameter changes that are desirable. For example,
* if it is found that the JPEG file is grayscale, you might want to do
* things differently than if it is color. You can also delay setting
* quantize_colors and associated options until this point.
*
* j_d_defaults initializes out_color_space to CS_RGB. If you want grayscale
* output you should set out_color_space to CS_GRAYSCALE. Note that you can
* force grayscale output from a color JPEG file (though not vice versa).
*/
METHODDEF void
d_ui_method_selection (decompress_info_ptr cinfo)
{
/* if grayscale input, force grayscale output; */
/* else leave the output colorspace as set by main routine. */
if (cinfo->jpeg_color_space == CS_GRAYSCALE)
cinfo->out_color_space = CS_GRAYSCALE;
/* select output routines */
cinfo->methods->output_init = output_init;
cinfo->methods->put_color_map = put_color_map;
cinfo->methods->put_pixel_rows = put_pixel_rows;
cinfo->methods->output_term = output_term;
}
/*
* OK, here is the main function that actually causes everything to happen.
* We assume here that the JPEG filename is supplied by the caller of this
* routine, and that all decompression parameters can be default values.
* The routine returns 1 if successful, 0 if not.
*/
GLOBAL int
read_JPEG_file (char * filename)
{
/* These three structs contain JPEG parameters and working data.
* They must survive for the duration of parameter setup and one
* call to jpeg_decompress; typically, making them local data in the
* calling routine is the best strategy.
*/
struct Decompress_info_struct cinfo;
struct Decompress_methods_struct dc_methods;
struct External_methods_struct e_methods;
/* Select the input and output files.
* In this example we want to open the input file before doing anything else,
* so that the setjmp() error recovery below can assume the file is open.
* Note that cinfo.output_file is only used if your output handling routines
* use it; otherwise, you can just make it NULL.
* VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
* requires it in order to read binary files.
*/
if ((cinfo.input_file = fopen(filename, "rb")) == NULL) {
fprintf(stderr, "can't open %s\n", filename);
return 0;
}
cinfo.output_file = NULL; /* if no actual output file involved */
/* Initialize the system-dependent method pointers. */
cinfo.methods = &dc_methods; /* links to method structs */
cinfo.emethods = &e_methods;
/* Here we supply our own error handler; compare to use of standard error
* handler in the previous write_JPEG_file example.
*/
emethods = &e_methods; /* save struct addr for possible access */
e_methods.error_exit = error_exit; /* supply error-exit routine */
e_methods.trace_message = trace_message; /* supply trace-message routine */
e_methods.trace_level = 0; /* default = no tracing */
e_methods.num_warnings = 0; /* no warnings emitted yet */
e_methods.first_warning_level = 0; /* display first corrupt-data warning */
e_methods.more_warning_level = 3; /* but suppress additional ones */
/* prepare setjmp context for possible exit from error_exit */
if (setjmp(setjmp_buffer)) {
/* If we get here, the JPEG code has signaled an error.
* Memory allocation has already been cleaned up (see free_all call in
* error_exit), but we need to close the input file before returning.
* You might also need to close an output file, etc.
*/
fclose(cinfo.input_file);
return 0;
}
/* Here we use the standard memory manager provided with the JPEG code.
* In some cases you might want to replace the memory manager, or at
* least the system-dependent part of it, with your own code.
*/
jselmemmgr(&e_methods); /* select std memory allocation routines */
/* If the decompressor requires full-image buffers (for two-pass color
* quantization or a noninterleaved JPEG file), it will create temporary
* files for anything that doesn't fit within the maximum-memory setting.
* You can change the default maximum-memory setting by changing
* e_methods.max_memory_to_use after jselmemmgr returns.
* On some systems you may also need to set up a signal handler to
* ensure that temporary files are deleted if the program is interrupted.
* (This is most important if you are on MS-DOS and use the jmemdos.c
* memory manager back end; it will try to grab extended memory for
* temp files, and that space will NOT be freed automatically.)
* See jcmain.c or jdmain.c for an example signal handler.
*/
/* Here, set up the pointer to your own routine for post-header-reading
* parameter selection. You could also initialize the pointers to the
* output data handling routines here, if they are not dependent on the
* image type.
*/
dc_methods.d_ui_method_selection = d_ui_method_selection;
/* Set up default decompression parameters. */
j_d_defaults(&cinfo, TRUE);
/* TRUE indicates that an input buffer should be allocated.
* In unusual cases you may want to allocate the input buffer yourself;
* see jddeflts.c for commentary.
*/
/* At this point you can modify the default parameters set by j_d_defaults
* as needed; for example, you can request color quantization or force
* grayscale output. See jdmain.c for examples of what you might change.
*/
/* Set up to read a JFIF or baseline-JPEG file. */
/* This is the only JPEG file format currently supported. */
jselrjfif(&cinfo);
/* Here we go! */
jpeg_decompress(&cinfo);
/* That's it, son. Nothin' else to do, except close files. */
/* Here we assume only the input file need be closed. */
fclose(cinfo.input_file);
/* You might want to test e_methods.num_warnings to see if bad data was
* detected. In this example, we just blindly forge ahead.
*/
return 1; /* indicate success */
/* Note: if you want to decompress more than one image, we recommend you
* repeat this whole routine. You MUST repeat the j_d_defaults()/alter
* parameters/jpeg_decompress() sequence, as some data structures allocated
* in j_d_defaults are freed upon exit from jpeg_decompress.
*/
}